A doll-house scale park bench roughly based on a common style of bench in New York City’s Central Park. There are two leg widths, and two bench widths in this set. The bench slat widths are 100mm and 170mm, allowing for a wide or compact bench. The legs are provided in 4mm width and 7mm width. View…
Category: builds
Modding the Broken Airship
It would be a terrible waste to throw away the parts of the failed airship, as it we’d be tossing 50+ hours of printing, so we’ll add some parts and continue to use it, possibly as a previously decommissioned airship renovated and modded by some faction or gruop in the City in the Sky. The rear hard-points…
Airship 1 – Model Errors
I recently backed the RPG Tool Wargaming Printable Items Kickstarter, and received the model files in mid December. I’ve started to make my way through the models, printing as many of them as look interesting. Quite a lot of the models are supplied as components that can be combined to create more complex and varied structures. Why not…
Dungeon Accessories – Beds
Where do all of the monsters and NPCs sleep? Well, with a fair bit of printing (really 9 hours and 43 minutes): View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) and about an hour of glueing and curing: View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) now…
Full Scale Totem
I really enjoyed the look and quality of the Monument Valley Totem model I printed at half scale, and decided shortly after that print that a full scale print of the model was in order. I quickly printed the first pieces, and it was clear that at full scale, this was going to be a large Totem:…
Seven Oases – Print One
We’re building a city – the haven of the Seven Oases. Elevated walkways, docks, and camps dot the shores of the lakes that are fed by springs deep under the sands. Venture too far from the shade of the trees, and the protection of the walkways and docks, and the dangers of the desert are bound to…
Sewer Dungeon – Final Encounter
With a thwoomp and a fading flash of light, the party was pulled into the magic portal, whisking them away from the sewer dungeon they’d been exploring for the last three sessions. View this post on Instagram A post shared by Dwyer Devices (@dwyerdevices) The final session in the sewers involved the party sneaking through the workshop…
Holiday Ornament – Individual Prints
Final draft of the holiday ornament. Tolerances are perfect, and everything stays in place with just tension. Going to try a few prints at higher quality to see if the extra print time has a worthwhile effect. Almost time to crank out a dozen or so of these. View this post on Instagram A post…